Windows Media Player is a great way to view your favorite movie content. However, with the program comes the risk of the occasional OxcOOd1199 error occuring. This frustrating error will hinder your ability to enjoy Windows Media Player properly and will only get worse if left alone.
Symptoms of OxcOOd1199 Errors
OxcOOd1199 errors will make themselves known almost immediately. It may be that you simply can’t access your Windows Media Player. Or, it might be that you get an error message that says something like, “OxcOOd1199: Cannot Play File.”
Causes of OxcOOd1199 Errors
OxcOOd1199 errors tend to happen to computers that have just updated their version of Windows Media Player. It is also a common occurrence after a service pack from Microsoft is installed. In either case, the underlying factor is a file, or files, that have become corrupt and therefore do not function properly when trying to communicate with Windows Media Player, causing the error in question to occur.
Fixing OxcOOd1199 Errors
Probably the easiest way in which to address an OxcOOd1199 error is by restoring the computer back to a date before any updates and/or service packs were installed. Once this system restore is accomplished, then a reinstallation of either the update or the service pack can then be attempted. To conduct a system restore, follow these steps:
1. Click on the PC’s start button.
2. Find and click on Programs, Accessories, Tools.
3. Find and select System Restore.
4. Choose the option where it says “Restore My Personal Computer to Previous Period.”
5. Click the Next button.
6. Choose the restore point you wish to use and then click the Next button.
7. Confirm your choice when prompted to do so.
Restart your computer to be sure everything takes hold.
A netfxocm.dll file is a file that is vital to the daily operations of any Windows Operating System. However, for a variety of reasons, there may be times when a netfxocm.dll file error occurs which would then require immediate attention.
Symptoms of netfxocm.dll Errors
When a netfxocm.dll error occurs an alert in the form of an error message is immediately given. Additional, when there is a netfxocm.dll error that is occurring, or about to occur, it may be noticeable as certain programs and/or program files will not be able to be accessed properly.
Causes of netfxocm.dll Errors
Netfxocm.dll errors can be caused by a number of factors. It may be that the particular netfxocm.dll file in question is corrupted due to the improper installation of a specific program. However, the most common cause of netfxocm.dll errors is spyware that has made its way into the netfxocm.dll file thus corrupting it.
Fixing netfxocm.dll Errors
If you know which program is causing the netfxocm.dll error then you can try to uninstall and then reinstall the program to see if that fixes the issue. However, it is always a good idea to use your anti-spyware software to check your computer for such malicious software. To do this, execute the following steps:
1. Open your computer’s anti-spyware program.
2. Select to scan the entire computer.
3. Allow the scan to run.
4. Once scan is complete, either quarantine or delete any and all spyware that is found.
Restart your computer to allow changes to take effect.
A Media Player Error 800706be is an error that will occur in direct relation with using Windows Media Player. This problem is one that is usually the result of a corrupted file and can mean an unstable operating system and further problems if not swiftly taken care of.
Symptoms of Media Player Error 800706be
When Media Player Error 800706be occurs it is known instantly as a pop-up style error window appears alerting the PC user to the problem. Another sign that Media Player Error 800706be may be lurking is the inability to use Windows Media Player properly.
Causes of Media Player Error 800706be
In most cases, Media Player Error 800706be is caused by a corrupt file. This may be due to a bad system file within the computer’s registry or it may even be that a virus has corrupted a specific file.
Fixing Media Player Error 800706be
Fixing Media Player Error 800706be can be as easy as running a Windows Update. However, there may be a chance that the update will not work properly due to the actual error itself, in which case a system restoration to a past point without the problem should do the trick. This can be done as follows:
1. Click the start button.
2. Click on Programs, Accessories, Tools.
3. Select System Restore.
4. Click Restore My Personal Computer to Previous Period.
5. Click Next.
6. Select your restore point and then click Next.
7. Confirm your choice.
8. Restart your computer.
After this is done you should be able to run a Windows Update, which is recommended so the problem doesn’t repeat itself.
A User32.dll file is necessary for the operation of Windows. Windows uses this type of file for the storage of graphic elements such as windows and/or dialog boxes. When these files get corrupted or deleted the end result can be a User32.dll error.
Symptoms of User32.dll Errors
Like many Windows based errors that can occur, the telltale sign of a User32.dll error is an annoying pop-up style error message. In extreme cases, you will not be able to access Windows because of the User32.dll error.
Causes of User32.dll Errors
The most common cause for a User32.dll error is a User32.dll file that has become corrupt or accidentally deleted. This can happen due to a virus or any other type of malware.
Fixing User32.dll Errors
There are two ways in which you can approach a User32.dll error. The first way would only apply if you know the program that is causing the error to occur. If that is the case then execute the following steps:
1. Click the start button on your computer.
2. Select Add/Uninstall Programs.
3. Uninstall the program in question.
4. Reinstall the program in question.
5. Restart your computer for changes to take hold.
The other method is to simply update your Windows operating system. For this option, follow the following steps:
1. Click the start button on your computer.
2. Click All Programs.
3. Click Windows Update.
4. Click Change Settings.
5. Find and select the option that you want.
6. Find Recommended updates, and then click to select the “Include recommended updates when downloading, installing, or notifying me about updates” check box
7. Click OK.
Restart your computer.
Anyone using a Windows operating system can fall victim to a tcpip.sys problem, which unfortunately is usually related with the dreaded Blue Screen of Death. When this error occurs files can be lost and the PC in question will usually shut down.
Symptoms of tcpip.sys Errors
A machine that functions erratically is usually the first sign of a tcpip.sys error. After some time the Blue Screen of Death will likely be a result of the error which is exactly as it sounds. The computer will suddenly freeze up and the screen will go blue with a long string of error messages on screen.
Causes of tcpip.sys Errors
Corrupt files are most often the cause of tcpip.sys errors that can lead to the Blue Screen of Death. Because the tcpip.sys is a system file, it leads into other files within the operating system and can cause plenty of chaos on the system as a whole. The corruption in question is often malware or a virus.
Fixing tcpip.sys Errors
One of the most basic solutions to fixing a tcpip.sys error is making sure that only one anti-virus program is installed on your computer. While sometimes more is better, in the case of anti-virus software, one is what is desired and ideal. Many have reported that after conducing this simple fix the problem was resolved with a quick anti-virus scan. Therefore, conduct the following:
1. Search the PCs program files for any and all anti-virus programs, including any free trial versions that came with your computer.
2. Choose which one you will keep.
3. Uninstall each anti-virus program that you are not electing to keep.
4. Once all uninstalls are complete, restart your computer.
Run an anti-virus scan of all system files.
A Runtime Error 2147417848 is an error that is the direct result of using the Microsoft Visual for Basic Macro. Usually associated with the program Microsoft Excel, this problem can be especially frustrating as it might only happen on certain PCs and not others.
Symptoms of Runtime Error 2147417848
When a Runtime Error 2147417848 occurs you will know right away as a pop-up style error message will appear. You will also likely not be able to access Excel in the correct manner, or at the very least there will be some spreadsheets that will be affected by the error.
Causes of Runtime Error 2147417848
This problem is generally causes as a result of using the Macro too many times. Usually, this overuse will result in pivot tables being created which then generates the error. Unfortunately, there is nothing that can be done about using the Macro as it is part of the program.
Fixing a Runtime Error 2147417848
For this type of error, Microsoft has created what is known as a Hotfix. The Hotfix is an easy and quick solution that can be used to fix the Macro that is causing the problem. To obtain the Hotfix for a Runtime Error 2147417848 execute the following steps:
2. Conduct a search for Runtime Error 2147417848.
3. Find a knowledge based article regarding the Runtime Error 2147417848 in question.
4. Look for the “Hotfix download available” button and click to download.
Follow the prompts given then restart your computer to make sure the Hotfix is applied properly.
An IP Address Conflict occurs when two computers that are on the same LAN network end up trying to use the same IP Address. As only on computer can use a unique IP Address, the conflict, or an error, will occur.
Symptoms of an IP Address Conflict
When an IP Address Conflict occurs you will receive a pop-up style error message, typically coming from the lower tool tray of your computer. In addition, one, or both, of the computers that are connected to the same LAN line may not be able to access the internet properly and there will be a number of network resources that might not be able to be accessed by either machine.
Possible Causes of an IP Address Conflict
While an IP Address Conflict is indeed rare, it often happens when multiple network adaptors have their IP Address conflict with themselves. It can also be caused by a laptop that is put in sleep mode while it is connected to another network using the same IP address or a router that is in need of updating.
How to Fix an IP Address Conflict
There are a number of ways in which to deal with an IP Address Conflict. The easiest way is to renew your computer’s IP Address in the following manner:
1. Simply release and renew the IP Address for the computer in question.
2. Restart the computer and the problem should be resolved.
Another way to approach fixing an IP Address Conflict is by updating your router’s firmware. If the DHCP server is not functioning properly then a quick update may be all you need to resolve this annoying dilemma.
Regardless of the Windows Operating System your PC uses you might run into an Error C000021a, also known as the Blue Screen of Death. This is never a good sign and should be addressed as soon as it occurs.
Symptoms of an Error C000021a
Whenever an Error C000021a occurs you will know it. The telltale sign is of course going to be your computer screen going all blue with a string of words and messages that you might not understand. Before you ever get to that point though, your computer will likely give you signs, like slowing down dramatically or even freezing periodically.
Causes of an Error C000021a
Unfortunately, the Error C000021is a hard error to diagnose. There are several factors that could play a role in such an error including the presence of adware, specific software problems, or even a registry that has become cluttered and corrupt over time.
Fixing an Error C000021a
Newer versions of the Windows Operating System will automatically run a check for solutions and you might get lucky enough to get one that works. However, if you can’t find the automatic solution you are looking for you can try to go about it manually.
- Click on the Start button.
- Click on Control Panel.
- Double Click Programs Report.
- Click Check for New Solutions.
- If solutions are available click on them and follow steps provided.
- Restart your computer after the application has finished making sure changes take effect.
See if the Error C000021a is still plaguing your computer.
A Buffer Overrun is actually a common attack on a computer that is designed by computer hackers. It is one of the most common forms of security risk, and it happens when unchecked external data is treated as trustworthy. These types of attacks are quite common with C and C++ coding that have poor coding practices in place.
Symptoms of Buffer Overrun
When a Buffer Overrun occurs, one of two things will happen. It could be that your application will abort with a core dump, access violation, or segmentation fault error message. That is unfortunately a best case scenario. In the worst case scenario a hacker can exploit weak files and add their own malicious code which can be hard to catch, until you realize your online security has been compromised.
Causes of Buffer Overrun
Malware can be the cause of Buffer Overrun, especially if the hackers have had their way with your computer’s files already. However, another cause may be a registry that has become corrupt due to being unorganized and cluttered. Whatever the cause may be, it is important to root out a Buffer Overrun as soon as it is discovered.
Fixing a Buffer Overrun
Whenever a Buffer Overrun problem occurs the first thing that you should do when attempting to fix it is run a complete anti-malware scan on your computer.
- Locate the anti-malware software icon on your desktop or computer tray.
- Double-click the icon.
- Run a full system anti-malware scan.
- Allow scan to compete.
- Any malware that is found should be put in quarantine or deleted.
Restart your computer after these actions to ensure all changes take effect.
Trayapp is a specific type of software that is automatically installed with most HP printer products. The software is needed so that the HP device in question can scan properly as well as print photos. This type of software is also known as HP Photosmart Digital Imaging software. Occasionally, a Trayapp error can and will occur.
Trayapp Error Symptoms
When a Trayapp error occurs you will not be able to use your HP printer effectively. Furthermore, a manual forced shutdown will be required each time you log off of your computer. This is not a problem that will go away on its own and will likely only get worse if left alone.
Cause of a Trayapp Error
Though a Trayapp error can have several causes there are a couple of more common causes that typically are the culprits. One would be that the MSI file used for the application is missing and/or corrupt. It could also be that a registry entry on the PC itself is corrupt which in turn will cause the error to occur.
Fixing a Trayapp Error
The easiest way to go about fixing a Trayapp error is by using the HP device’s installation disk.
- Start your computer.
- As Windows is starting up insert the HP product disk.
- Allow the Windows Installer to run.
- If a missing file is found by the installer it is likely to be replaced.
- Once the Windows Installer has finished restart your computer.
- See if the Trayapp error persists.
A Syntax Error is one that occurs in the syntax sequence of a particular program that is intended to be written in a certain computer language. This can happen in a number of programs and when it does there is typically an error message that is associated with it.
Symptoms of a Syntax Error
Whenever a Syntax Error occurs the end result is not being able to access the particular program that you are trying to access. The telltale sign of course would be the pop-up style error message that alerts the user to the fact that such an error is occurring.
Cause of a Syntax Error
A Syntax Error can be caused by a variety of factors. Most commonly, Syntax Errors are caused by misspellings or bad punctuation. This is commonplace when a program tries to translate itself from one platform to another. The problem can be further intensified if the PC in question has a cluttered registry that has therefore become corrupt.
Fixing a Syntax Error
Syntax Errors can often be debugged and fixed automatically, but in some cases manual manipulation may be needed.
- Open the computer’s code and compile program.
- Locate the manual debugging tool by looking on the toolbar.
- Look under the Tool tab and search for Debug or Debug compiler.
- Click result found.
- Review the code for errors.
- Fix all errors you find.
- Save all changes then run the compiler.
- Restart your computer when the process is complete.
Check to see if the Syntax Error persists.
A Parse Error is an error that is in the code of one of the computer’s programs. Some computer codes are very strict in regards to how the code must be written and even one character being off can cause a Parse Error. This is typical in many blogs that have a place where code can be input.
Symptoms of a Parse Error
When a Parse Error occurs in a blog you will be notified with a large pop-up style error message. The end result will be the particular blog not operating properly and not displaying properly either.
Causes of a Parse Error
A Parse Error can occur due to incorrect human input on a string of code or due to a corrupt file that leads to the incorrect code. Such a file corruption would likely be caused by a registry that is too cluttered and is therefore allowing the Parse Error to take place.
Fixing a Parse Error
The first action that should be taken when trying to fix a parsing error is to check the code in the blog that is being effect ted manually. Make sure all lines of the code end with a semi-colon and if they don’t, correct the problem. If the problem persists after this fix then there is an error with the system somewhere and a system restore may be the perfect solution.
- Start your computer in Safe Mode (press F8).
- Click on the Start Button in Safe Mode.
- Click on All Programs in safe Mode.
- Click Accessories.
- Click System.
- Click System Restore.
- Follow the prompts that are displayed.
Restart your computer.
Any PC that is running an older version of the Windows Operating System will commonly come across runtime errors. Of these errors, one of the most prevalent is the Vbscript Runtime Error 800a01f4.
Symptoms of a Vbscript Runtime Error 800a01f4
When a Vbscript Runtime Error 800a01f4 does occur you will be notified with a pop-up style error message. You may also notice a change in your computer’s performance and you will not be able to access the Reporting Web site in Microsoft’s SMS 2003.
Causes of a Vbscript Runtime Error 800a01f4
Like many other runtime errors the Vbscript Runtime Error 800a01f4 is caused by a program that is not running properly. This could be caused by a registry that has become too cluttered and therefore corrupt or it could be caused by a virus that was downloaded with a recent program you installed.
How to Fix a Vbscript Runtime Error 800a01f4
A full anti-virus scan is a great idea with any runtime error, including a Vbscript Runtime Error 800a01f4. However, Microsoft offers a work around to this problem, and this can always be implemented.
- Click the Start button.
- Click on Administrative Tools.
- Click Internet Information Services (IIS) Manager.
- Expand the server_name (local computer) container.
- Expand Web Sites.
- Expand Default Web Site.
- Right-click SMSReporting_site_code.
- Click on Properties.
- Find the Virtual Directory tab.
10. Click Configuration.
11. Find the Options tab.
12. Click to select Enable session state.
13. Click OK twice.
14. Click Start.
15. Click Run.
16. Type cmd.
17. Click OK.
18. Watch for the command prompt.
19. Type iisreset.
An Unmountable Boot Volume error is a frequent error that occurs with certain versions of Windows Operating systems. The error itself can’t be ignored as a PC is rendered useless when it occurs.
Symptoms of an Unmountable Boot Volume Error
Before an actual Unmountable Boot Volume error does occur a computer will likely slow to a crawl. This is followed by a big blue screen that has the dreaded Unmountable Boot Volume error message stating that Windows is being shut down to protect the computer from any further damage. At this point your PC is useless until repaired.
Causes of an Unmountable Boot Volume Error
While the cause of this error could be a virus, it is more likely that it is just due to everyday use of a PC that hasn’t been taken care of. Without proper maintenance the system’s registry can easily become corrupt and after being ignored for too long, even everyday use can cause the Unmountable Boot Volume error to occur.
Fixing an Unmountable Boot Volume Error
An Unmountable Boot Volume error is unfortunately a hard one to fix. However, if you have your Windows installation disk you can attempt to reinstall your operating system.
- Insert installation disc into the computer.
- When the welcome screen appears, hit the R key for the recovery mode with a DOS prompt.
- Type chkdsk /p and hit Enter.
- Allow the process to run.
- Type fixboot and hit Enter.
- Type the Y key when asked Yes or No.
Type exit and press Enter for computer reboot.
Dr. Watson Postmortem Debugger is an error debugging program that is used by Windows XP on other crashed programs after the fact. The program collects information about a specific error that has occurred and then sends that information off, but sometimes even a Postmortem Debugger error can occur.
Postmortem Debugger Error Symptoms
As it is, the Postmortem Debugger program uses considerable resources on a PC and can slow a machine down a bit. However, when the program starts running into errors then it is highly likely that the PC will experience a big slow down as well as an error message about the Postmortem Debugger problem.
Causes of Postmortem Debugger Errors
The Postmortem Debugger error is most likely caused by one or more files on a PC being corrupt. This can be due to a registry that is unorganized which can easily lead to the error. Another possible cause could be a virus.
Fixing the Postmortem Debugger Errors
To fix the Postmortem Debugger errors you may be experiencing you can first try to manually run a Windows Update. Be sure that you restart your computer once you have performed a manual update so all new updates will take hold. If you do that and you are still having problem you can try to run an anti-virus scan.
- Double click on your anti-virus icon.
- Select to scan the entire computer.
- Allow the scan to run.
- If any viruses are found delete them immediately.
- Restart your computer to allow changes to take effect.
- See if problems persist.
An Execution Engine Error is one that is commonly associated with the program Event Viewer. This error message is one that might not be very prevalent, but when it does come up it can cause things on a PC to wrong in an awful hurry.
Symptoms of an Execution Engine Error
For the most part an Execution Engine Error is easily noticed when as any attempt to open the Event Viewer program results in an instantaneous crash with the following message:
“.NET Runtime version 2.0.50727.3603 – Fatal Execution Engine Error (7A036050) (80131506)”
From there the only thing you can do is click on the red icon you see to get more information about the particular Execution Engine Error you are working with.
Causes of an Execution Engine Error
An Execution Engine Error can be caused by a couple of different things. The most common factor is one that Microsoft has already deemed important enough to make a fix for, which is program related. However, there may be an issue with a computer’s registry in some instances. No matter what the cause is though, without addressing the problem right away it will only get worse.
Fixing an Execution Engine Error
Because Microsoft came out with their own “hot fix” for this problem it is the first solution that you should attempt.
- Go to Microsoft’s help pages.
- Search for Execution Engine Error.
- Execute the hot fix as instructed.
- Restart your computer once the hot fix is completed.
- Attempt to run Event Viewer again and see if your system is fixed.
Entry Point Not Found errors are ones that typically happen when there is too much data overloading a PC. These errors can come up with various applications such as Windows XP updates and even more recently with Skype.
Symptoms of Entry Point Not Found Errors
When an Entry Point Not Found error occurs you are generally clued in by the way your PC acts. Your machine will likely slow and might even crash. The Blue Screen of Death is not even out of the picture with this error. Additionally, a pop-up style error message will likely appear alerting you to the problem.
Entry Point Not Found Errors Causes
Lack of maintenance to a PC is a common cause of an Entry Point Not Found error. When there is a lack of maintenance it is not unlikely that certain files will be broken and/or incomplete. This is something that only gets worse as time passes.
Fixing an Entry Point Not Found Error
To start with, try to determine what kind of Entry Point Not Found error you are receiving. If you can pinpoint it to a certain program then try uninstalling and then reinstalling that program. If that solution fails try to restore your computer to a time when there was no such error popping up.
- Start your computer in Safe Mode.
- Click on the Start Button.
- Click on All Programs.
- Click Accessories then System then System Restore.
- Click on a restoration date of your choice.
- Follow the prompts that are displayed.
- Restart your computer to allow change to take effect.
Socket Error 10061 is another type of Socket Error that is common with PC users who are trying to use their Microsoft based e-mail program. When this error occurs it makes it impossible for the user to accomplish what they set out to do in regards to their e-mail.
Socket Error 10061 Symptoms
A Socket Error 10061 will occur when a PC user is trying to send e-mail messages using programs such as Windows Live and Outlook Express. When this does happen the user knows right away as a large error message comes up and any outgoing messages that have been attempted to be sent will have gone nowhere and still show up in the outbox.
Socket Error 10061 Causes
This particular Socket Error is causes when the access to an ISP server is blocked for some reason. While this might be a problem with the computer’s registry or an intentional block from an ISP’s server as it might regard too much sent mail as SPAM, the most likely cause is a misconfigured firewall.
Fixing Socket Error 10061
The first thing to check when a Socket Error 10061 comes up is the settings in your e-mail program. Be sure everything is set up properly and that the POP3 and STMP servers are assigned to the proper location. If the problem still persists try accessing your firewall.
- Access your firewall program.
- Locate ISP Port settings.
- If set to block make appropriate change to allow.
Restart your computer to allow changes to take effect.
If there is one thing no PC user wants to see it is that their CPU usage is at 100%. When this occurs it signifies that there are major troubles ahead and it is an issue that needs to be addressed right away.
100% CPU Usage Symptoms
If your PC is letting you know that your CPU usage is at 100% you will likely know it. Because this means that all of your available memory is being used, your PC will slow dramatically. In some cases, if not attended to in a timely manner, this problem can lead to far worse consequences such as frequent freezes and/or crashes.
100% CPU Usage Causes
There are many factors that can attribute to your 100% CPU Usage troubles. In some cases it may be that your PC has very little, or even cheap, memory. However, it is more commonly a problem with the PC itself such as malware running in the background without you knowing or a registry that is disorganized and/or corrupted.
Fixing 100% CPU Usage
When you see that you are at 100% CPU Usage the first thing to do is to check your memory. If you find that the memory your PC contains is sufficient then you likely have malware issues that need to be attended to.
- Start your PC in Safe Mode by pressing the F8 key during startup.
- Find the anti-malware software icon located on your tool tray or on your desktop and double-click to open it.
- Scan the entire PC instead of just doing a quick scan.
- Delete any and all malware or other adware programs that are found.
Restart your computer for changes to take place.
A Btrieve Error 3012 is one that comes up from time to time with computers that are running specific Microsoft Operating Systems. While not all that bad at first, when left alone this error can quickly intensify and pose a real risk to your computer’s overall performance.
Btrieve Error 3012 Symptoms
The Btrieve Error 3012 occurs when you are attempting to run a certain program on your computer. When it first starts you get a message that tells you to restart the application. This might work at first but after awhile you will find that you have to restart the application more than a few times. Eventually you will not be able to run the application and you might begin to see the error far more often with other applications as well.
Btrieve Error 3012
The Btrieve Error 3012 is typically caused by a breakdown on the operating system of your computer. This can be caused by a program with corrupt files, a registry that has become corrupt, or an operating system that is not properly updated. It might even be that there is a virus on your computer that is causing all the grief.
Fixing Btrieve Error 3012
To start with, make certain that your computer is up to date with its Windows Updates. If it is then try the following solution.
- Start your computer in Safe Mode by pressing the F8 key during boot up.
- Click the Start Button.
- Click on All Programs.
- Click Accessories then System then System Restore.
- Click on a restoration date of your choice.
- Follow prompts.
Restart your computer to allow restoration to take place.