TuneUp Tips

OxcOOd1199 Error

Windows Media Player is a great way to view your favorite movie content. However, with the program comes the risk of the occasional OxcOOd1199 error occuring. This frustrating error will hinder your ability to enjoy Windows Media Player properly and will only get worse if left alone.

Symptoms of OxcOOd1199 Errors

OxcOOd1199 errors will make themselves known almost immediately. It may be that you simply can’t access your Windows Media Player. Or, it might be that you get an error message that says something like, “OxcOOd1199: Cannot Play File.”

Causes of OxcOOd1199 Errors

OxcOOd1199 errors tend to happen to computers that have just updated their version of Windows Media Player. It is also a common occurrence after a service pack from Microsoft is installed. In either case, the underlying factor is a file, or files, that have become corrupt and therefore do not function properly when trying to communicate with Windows Media Player, causing the error in question to occur.

Fixing OxcOOd1199 Errors

Probably the easiest way in which to address an OxcOOd1199 error is by restoring the computer back to a date before any updates and/or service packs were installed. Once this system restore is accomplished, then a reinstallation of either the update or the service pack can then be attempted. To conduct a system restore, follow these steps:

1. Click on the PC’s start button.

2. Find and click on Programs, Accessories, Tools.

3. Find and select System Restore.

4. Choose the option where it says “Restore My Personal Computer to Previous Period.”

5. Click the Next button.

6. Choose the restore point you wish to use and then click the Next button.

7. Confirm your choice when prompted to do so.

Restart your computer to be sure everything takes hold.

Netfxocm.dll Errors

A netfxocm.dll file is a file that is vital to the daily operations of any Windows Operating System. However, for a variety of reasons, there may be times when a netfxocm.dll file error occurs which would then require immediate attention.

Symptoms of netfxocm.dll Errors

When a netfxocm.dll error occurs an alert in the form of an error message is immediately given. Additional, when there is a netfxocm.dll error that is occurring, or about to occur, it may be noticeable as certain programs and/or program files will not be able to be accessed properly.

Causes of netfxocm.dll Errors

Netfxocm.dll errors can be caused by a number of factors. It may be that the particular netfxocm.dll file in question is corrupted due to the improper installation of a specific program. However, the most common cause of netfxocm.dll errors is spyware that has made its way into the netfxocm.dll file thus corrupting it.

Fixing netfxocm.dll Errors

If you know which program is causing the netfxocm.dll error then you can try to uninstall and then reinstall the program to see if that fixes the issue. However, it is always a good idea to use your anti-spyware software to check your computer for such malicious software. To do this, execute the following steps:

1. Open your computer’s anti-spyware program.

2. Select to scan the entire computer.

3. Allow the scan to run.

4. Once scan is complete, either quarantine or delete any and all spyware that is found.

Restart your computer to allow changes to take effect.

Media Player Error 800706be

A Media Player Error 800706be is an error that will occur in direct relation with using Windows Media Player. This problem is one that is usually the result of a corrupted file and can mean an unstable operating system and further problems if not swiftly taken care of.

Symptoms of Media Player Error 800706be

When Media Player Error 800706be occurs it is known instantly as a pop-up style error window appears alerting the PC user to the problem. Another sign that Media Player Error 800706be may be lurking is the inability to use Windows Media Player properly.

Causes of Media Player Error 800706be

In most cases, Media Player Error 800706be is caused by a corrupt file. This may be due to a bad system file within the computer’s registry or it may even be that a virus has corrupted a specific file.

Fixing Media Player Error 800706be

Fixing Media Player Error 800706be can be as easy as running a Windows Update. However, there may be a chance that the update will not work properly due to the actual error itself, in which case a system restoration to a past point without the problem should do the trick. This can be done as follows:

1. Click the start button.

2. Click on Programs, Accessories, Tools.

3. Select System Restore.

4. Click Restore My Personal Computer to Previous Period.

5. Click Next.

6. Select your restore point and then click Next.

7. Confirm your choice.

8. Restart your computer.

After this is done you should be able to run a Windows Update, which is recommended so the problem doesn’t repeat itself.

User32.dll Errors

A User32.dll file is necessary for the operation of Windows. Windows uses this type of file for the storage of graphic elements such as windows and/or dialog boxes. When these files get corrupted or deleted the end result can be a User32.dll error.

Symptoms of User32.dll Errors

Like many Windows based errors that can occur, the telltale sign of a User32.dll error is an annoying pop-up style error message. In extreme cases, you will not be able to access Windows because of the User32.dll error.

Causes of User32.dll Errors

The most common cause for a User32.dll error is a User32.dll file that has become corrupt or accidentally deleted. This can happen due to a virus or any other type of malware.

Fixing User32.dll Errors

There are two ways in which you can approach a User32.dll error. The first way would only apply if you know the program that is causing the error to occur. If that is the case then execute the following steps:

1. Click the start button on your computer.

2. Select Add/Uninstall Programs.

3. Uninstall the program in question.

4. Reinstall the program in question.

5. Restart your computer for changes to take hold.

The other method is to simply update your Windows operating system. For this option, follow the following steps:

1. Click the start button on your computer.

2. Click All Programs.

3. Click Windows Update.

4. Click Change Settings.

5. Find and select the option that you want.

6. Find Recommended updates, and then click to select the “Include recommended updates when downloading, installing, or notifying me about updates” check box

7. Click OK.

Restart your computer.

Syntax Error

A Syntax Error is one that occurs in the syntax sequence of a particular program that is intended to be written in a certain computer language. This can happen in a number of programs and when it does there is typically an error message that is associated with it.


Symptoms of a Syntax Error

Whenever a Syntax Error occurs the end result is not being able to access the particular program that you are trying to access. The telltale sign of course would be the pop-up style error message that alerts the user to the fact that such an error is occurring.


Cause of a Syntax Error

A Syntax Error can be caused by a variety of factors. Most commonly, Syntax Errors are caused by misspellings or bad punctuation. This is commonplace when a program tries to translate itself from one platform to another. The problem can be further intensified if the PC in question has a cluttered registry that has therefore become corrupt.


Fixing a Syntax Error

Syntax Errors can often be debugged and fixed automatically, but in some cases manual manipulation may be needed.



  1. Open the computer’s code and compile program.
  2. Locate the manual debugging tool by looking on the toolbar.
  3. Look under the Tool tab and search for Debug or Debug compiler.
  4. Click result found.
  5. Review the code for errors.
  6. Fix all errors you find.
  7. Save all changes then run the compiler.
  8. Restart your computer when the process is complete.

Check to see if the Syntax Error persists.

Parse Error

A Parse Error is an error that is in the code of one of the computer’s programs. Some computer codes are very strict in regards to how the code must be written and even one character being off can cause a Parse Error. This is typical in many blogs that have a place where code can be input.

Symptoms of a Parse Error

When a Parse Error occurs in a blog you will be notified with a large pop-up style error message. The end result will be the particular blog not operating properly and not displaying properly either.


Causes of a Parse Error

A Parse Error can occur due to incorrect human input on a string of code or due to a corrupt file that leads to the incorrect code. Such a file corruption would likely be caused by a registry that is too cluttered and is therefore allowing the Parse Error to take place.


Fixing a Parse Error

The first action that should be taken when trying to fix a parsing error is to check the code in the blog that is being effect ted manually. Make sure all lines of the code end with a semi-colon and if they don’t, correct the problem. If the problem persists after this fix then there is an error with the system somewhere and a system restore may be the perfect solution.




  1. Start your computer in Safe Mode (press F8).
  2. Click on the Start Button in Safe Mode.
  3. Click on All Programs in safe Mode.
  4. Click Accessories.
  5. Click System.
  6. Click System Restore.
  7. Follow the prompts that are displayed.

Restart your computer.

The Dreaded 100% CPU Usage Message

If there is one thing no PC user wants to see it is that their CPU usage is at 100%. When this occurs it signifies that there are major troubles ahead and it is an issue that needs to be addressed right away.


100% CPU Usage Symptoms


If your PC is letting you know that your CPU usage is at 100% you will likely know it. Because this means that all of your available memory is being used, your PC will slow dramatically. In some cases, if not attended to in a timely manner, this problem can lead to far worse consequences such as frequent freezes and/or crashes.


100% CPU Usage Causes

There are many factors that can attribute to your 100% CPU Usage troubles. In some cases it may be that your PC has very little, or even cheap, memory. However, it is more commonly a problem with the PC itself such as malware running in the background without you knowing or a registry that is disorganized and/or corrupted.


Fixing 100% CPU Usage

When you see that you are at 100% CPU Usage the first thing to do is to check your memory. If you find that the memory your PC contains is sufficient then you likely have malware issues that need to be attended to.



  1. Start your PC in Safe Mode by pressing the F8 key during startup.
  2. Find the anti-malware software icon located on your tool tray or on your desktop and double-click to open it.
  3. Scan the entire PC instead of just doing a quick scan.
  4. Delete any and all malware or other adware programs that are found.

Restart your computer for changes to take place.

Service Pack 3 Error

Service Pack 3 is a quick fix type of support for PC users that have Windows XP as their operating system. However, what is meant to be used as an aid can sometimes turn into a hindrance and when it does a Service Pack 3 Error will occur.


Service Pack 3 Error Symptoms

When a Service Pack 3 Error occurs you are alerted with a message. Most commonly you can expect to see messages such as “Service Pack 3 Error. Access is denied” or even “Service Pack 3 setup error. Service Pack installation did not complete.” No matter what message you get the end result will be the same; Service Pack 3 will not work for your PC.


What Causes Service Pack 3 Error

These types of errors generally occur due to system registry keys disallowing the Service Pack 3 to load. This can happen due to old and outdated drivers and is very common with a computer that has a corrupt registry. It might also be that your computer’s anti-virus software is disallowing the update to take place.


Fixing Service Pack 3 Error Troubles

Many times it is a third party program, like your computer’s anti-virus software, that is causing the fuss with the update. You can attempt to install the Service Pack 3 application after turning off your anti-virus but beware that your computer will be unprotected if you do.



  1. Close all open programs and restart your POC.
  2. Disable your anti-virus software.
  3. Attempt to reinstall the Service Pack 3 application.
  4. Restart your computer.

Enable your anti-virus software again.

CD-ROM Not Responding

When your computer has a CD-ROM Not Responding problem it means you can’t run programs that require a CD. It might also mean that there is much more going on with your computer than you might realize so you should address the situation right away.


CD-ROM Not Responding Symptoms


Anytime you are having CD-ROM Not Responding problems you will know it as you will not be able to use your computer’s CD-ROM for anything. This means no program running, no CD playing and, if it is a burnable CD-ROM, you will also lose the ability to burn any data to disc.


CD-ROM Not Responding Causes


The range of culprits that can be at the root of your CD-ROM Not Responding problems is wide. It can be anything from a CD that is dirty to a corrupt computer registry. It might also be that your CD-ROM device drivers are out of sorts and in need of updating and/or replacing.


Getting Rid of CD-ROM Not Responding Problems

Again, as there are multiple cause for a CD-ROM Not Responding problem, there are different solutions you can try.

Solution 1: Inspect and Clean the Disc.



  1. Eject the CD from the CD-ROM.
  2. Inspect the disc for any particles of dirt and/or smudges.
  3. Use a particle fiber cloth to clean the disc.
  4. Attempt to run the disc in the CD-ROM again.


Solution 2:  Check Device Manager

  1. Click the Start Button.
  2. Click on Control Panel.
  3. Double-click on System.
  4. Click on the Hardware tab.
  5. Click on the Device Manager tab.

If the CD-ROM ha an exclamation point on it, highlight it and press the Delete key and restart your computer to reinstall the CD-ROM drive.

Low Disk Space Error Solutions

A Low Disk Space Error can occur if you are a PC user trying to access the local hard disk on your computer and there is little space left. While the warning is a necessary one to have, the fact that you will receive this message every few seconds as long as you are online is a fact that is rather annoying.


Low Disk Space Error Symptoms

When this error occurs you are alerted with a pop up style error message. As mentioned, you will get this message every few seconds which is really doing nothing more than trying to get you to deal with the issue.


Low Disk Space Error Causes

Logically, the most common cause of a Low Disk Space Error is going to be a disk drive that is actually low on space. However, it might also be that your disk drive has space available, but it is loaded with all sorts of fragmented files. Another possibility could be that your PC’s registry is dangerously cluttered.


Low Disk Space Error Solutions

This error message will continue to pop up until you deal with it. The first thing you should do is defragment your disk drive:



  1. Click the Start Button.
  2. Open My Computer.
  3. Find the local disk volume that you will defragment and right-click it.
  4. Click Properties.
  5. Find the tab marked Tools, click where it says Defragment Now.
  6. Click Defragment.
  7. Restart your computer once finished.


If you still receive the error message after a defrag you will have little choice but to get rid of files and folders you no longer need. Otherwise, the Low Disk Space Error will simply continue to pop up on your machine.

What to do When the TWC Desktop Error Occurs

Ever since the implementation of Apps people have been installing them like crazy on everything from computers to mobile smartphones, especially when they are offered up for free. However, with new technology comes new bugs and one in particular is the TWC Desktop Error which is usually associated with The Weather Channel’s App.


TWC Desktop Error Symptoms

Like many other errors that can occur with your computer, the TWC Desktop Error will show itself in a big way via a pop up error message. Along with the TWC Desktop Error message you will likely also see “Unable to initialize page.” While this error is an annoyance, it doesn’t usually effect overall speed or force a PC shutdown.


TWC Desktop Error Causes

Again, this error is associated with the App of The Weather Channel, but that doesn’t necessarily mean it is a bad App. While that is a likely cause, another possible cause is your computer’s registry being corrupted. Still another possibility is that you didn’t install the App properly causing miscommunication between the App and the computer.


TWC Desktop Error Solutions

Since you already know the culprit is the Weather Channel App, then that is the most logical place to look when attempting a fix for this error.



  1. Access all the Apps on your computer.
  2. Located the Weather Channel App.
  3. Highlight the App.
  4. Click to uninstall the App.
  5. Restart your computer to allow change to take effect.


Once you have completed the uninstall, simply reinstall The Weather Channel App and see if the problem still persists.

Addressing a Script Error Message

Anytime you are using a Windows operating system whether old or new, a script error can occur. These errors will usually come up in the form of a pop up style message and will keep you from executing an action either partially or in full.


Symptoms of a Script Error

When your computer is experiencing script errors you will know as you will not be able to complete certain tasks. In some cases you may not be able to access certain websites.


Causes of a Script Error

Script errors can be caused by a number of things. Most commonly, they are caused by a file or program on your computer being corrupted. It could also be that the script in question is not updated properly. In extreme situations it may be that a virus is plaguing your system. Script errors are more common with computers using Internet Explorer 7.


Fixing a Script Error

Fixing a script error can usually be done in one of two ways:

Solution 1: Service Pack for Vista


  1. See which Windows operating system you are using.
  2. If it is Vista download the latest Service Pack.
  3. Run the Service Pack.
  4. Restart your computer and see if the script error has stopped.


Solution 2: Execute a Hotfix


  1. Identify the script error when you are prompted by pop up message.
  2. Go to Microsoft’s website and lookup the Hotfix for that specific script error.
  3. Execute the Hotfix.

You will not have to restart your computer after the Hotfix has been executed.

Getting Rid of Runtime Error 216

Some Runtime Errors are more common than others and some are much more annoying. One Runtime Error that is a good example of both is Runtime Error 216. This error not only pops up routinely with many PC users, it also makes their online experience a living nightmare.


Runtime Error 216 Symptoms

The most obvious sign that your computer is experiencing a Runtime Error 216 will be a little pop up error message stating so. Other symptoms include a dramatic decrease in a user’s ability to surf the web. When left alone for too long, this Runtime Error can blossom and create more havoc such as sudden system freezes and/or crashes.

Runtime Error 216 Causes

The number one most common cause for this specific Runtime Error is the SubSeven Trojan Virus infecting a PC. However, this error can also be cause by another type of corruption with your PC, namely with the registry.


Getting Rid of Runtime Error 216

Because the most common cause for this Runtime Error is a virus, it only makes sense to use an anti-virus program to catch and delete the virus. However, this particular virus is a strong one and may require an anti-virus software program that can scan your computer while offline. In any case, here is what to do:


  1. Close all open applications.
  2. Open up your anti-virus software by accessing it in the tool tray.
  3. Select to scan your entire PC, not just certain system files.
  4. Allow the scan to fully run.
  5. Once completed be sure to delete anything that is found.

Restart your computer to allow completion of the process.

What to Do When Your Computer Says There is Not Enough Memory

Anytime that you decide to try to load a program or just run one you may come across an error that states there is not enough memory for your computer to execute the task. While it might be the case that your computer is just running out of memory, it might be something else and something that can be addressed.


Not Enough Memory Symptoms

When you computer’s memory is really running low it may take longer to access certain files and/or programs. Additionally, you may not be able to execute certain tasks such as run a .wav file. When this happens you will see an error message that reads something like:

“Not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.”

Not Enough Memory Causes

When your computer is telling you there is not enough memory then there are only two things that can be causing it. Either your commuter really is extremely low on memory or your system is jammed up with too much information, much of which is likely corrupt from a virus and/or malware. This can also happen when a computer’s registry becomes cluttered and corrupt.


Not Enough Memory Fixes

If you first determine that your computer does have plenty of memory then you can follow these steps to attempt to alleviate the problem:


  1. Run a scan of your complete system checking for viruses, malware, and adware using your anti-virus software.
  2. If anything is found, delete it immediately.
  3. Restart your computer when finished in order to allow all changes to take effect.


Additionally, you can check with the Microsoft support page to see if there is a Hotfix for the specific error you are getting. If there is you can execute it by following the instructions and you will not have to restart your computer once the Hotfix is complete.

Fixing Your Mouse Freeze

There is little that is more frustrating for a PC user than having a mouse freeze while being in the middle of work or play. Unfortunately, this is something that happens to the majority of the PC users out there, but that doesn’t mean you necessarily need a new mouse.


Mouse Freeze Symptoms

When your mouse freezes you certainly know it. It’s kind of like trying to drive a car without a steering wheel. When you mouse freezes up there is literally nothing you can do. Whatever program you are in, you are stuck in until your mouse is unfrozen.


Mouse Freeze Causes

When your mouse decides to freeze up it is usually at a very inopportune time and this can happen for several reasons. It may be that the sensors that are a part of your mouse are dirty. This happens a lot with a track-ball style mouse. If your mouse is wireless, it could be that the battery is low or that your USB is not connected properly. However, it could also be that your drivers need updating.


Fixing a Mouse Freeze

Fixing your mouse freeze should include a list of steps that will not only fix the problem, but steps that will also help maintain your mouse going forward:



  1. Ensure the connection with your mouse to your PC is good.
  2. If wireless, ensure a fresh battery is installed.
  3. Clean your mouse at any points necessary. You can usually take a mouse apart in order to get to its sensors.
  4. Go online and find the latest drivers for your mouse and make sure you are fully up to date. Be cautious and choose a reputable website for this.

Do-It-Yourself Solutions for Firefox Error 203

One of the most common error messages for those who use the internet browser Firefox is the Firefox Error 203. This error is annoying and prohibitive one and is easy to spot as it reads, ‘unexpected installation Error.’ If you are seeing this error then you are likely not able to install a new extension or theme on your Firefox browser. If left unchecked, even current themes and add-ons will cease to work.

What Causes the Firefox Error 203?

The Firefox Error 203 message can be caused by a variety of different factors. The most common factor is an update of Firefox that has not gone the way it should. Another culprit could be the type of firewall that a user is running or the problem may lie deep within the computer’s registry where a corrupt file may be lying in wait.

How to Fix Firefox Error 203

Since there are different factors that could be causing the Firefox error 203 to occur, there are several methods you can use to rid yourself of the error.

Solution 1: Delete Files in Profiles Folder


Open your Firefox Profiles Folder.

  1. Delete the extension files labeled extensions.ini, extensions. cache, and extrensions.rdf.
  2. Restart your computer.
  3. Restart Firefox so files can be automatically reinstalled.
  4. Attempt to reinstall extension or theme.

Solution 2: Firewall Verification


Check which firewall your system is using.

  1. Look for either CA firewall or Zone Alarm firewall.
  2. If either is found, disable the firewall by using the program’s icon located in your system’s tray.
  3. Once disabled, attempt to install the extension or theme.
  4. Enable the firewall if successful.

Solution 3: Fix Corruption in Profile Folder


Open your Firefox Profiles Folder.

  1. Find and either rename or delete the profiles.ini file.
  2. Double click the Profiles Folder and delete the ‘Whatever Default’ folder.
  3. Restart your computer.
  4. Restart Firefox so the default folder can be automatically recreated.
  5. Attempt to reinstall the extension or theme.

While the first method may not work for your computer, the second or third likely will if the first fails. So, you should go in order and attempt to follow the steps provided in order to rid your machine of the dreaded Firefox Error 203.


Thank you for using our website to help you with your Firefox Error 203 problem. We hope you can use the information provided to successfully fix the problem so you can once again enjoy your internet browsing with Firefox. If you have any further questions you would like to ask, please contact us at your earliest convenience as we are more than happy to assist you. Good luck!

Tune Up My Browser

No matter which internet browser you use you may have discovered over time that it goes slower and slower. While this may not be a big deal at first, after awhile, you may find yourself saying, “I need to tune up my browser!” More…

Steps to Tuning Up Your Computer

Tuning up your computer will help it run the way that it was meant to. Over time, if your computer is not maintained it can go slower due to a number of reasons and if left untreated, you can eventually be left with a computer that runs as slow as molasses. More…

Identify and Prevent Spyware/Adware

Spyware and adware are two things that can spread total destruction on your computer. If left untreated for too long, your computer may be susceptible to slowdowns or even crashes due to spyware and adware. More…

Personal tools