Do-It-Yourself Solutions for Windows Vista Error Code 10 Problems

Windows Vista is one of the newer operating systems that is made by Microsoft. One of the drawbacks that have occurred with Windows Vista is a series of problems that are all designated with an error code 10. Windows Vista Error Code 10 problems typically relate to hardware and device driver issues and when they occur it can be hard to get certain hardware or other devices to work properly.

What Causes Windows Vista Error Code 10 Problems?

Once again, Windows Vista Error Code 10 problems usually occur as a result of driver problems. This can be because the hardware or device in question is using multiple drivers or even outdated drivers. Another possible cause can be that Windows Vista is in need of updating or your computer’s registry may even have a corrupt file or two that will hinder normal operation.

How to Fix Windows Vista Error Code 10 Problems

There are a number of Windows Vista Error Code 10 problems that you might be experiencing. However, there are two solutions in particular that you may find helpful. The solution that will work for you will of course depend on the actual cause of the error you are receiving.

Solution 1: Update Drivers Using Microsoft

This solution will only work if you can pinpoint the actual hardware or device that is causing the Windows Vista Error Code 10 problem you are experiencing.

Steps:

Go to http://update.microsoft.com.

  1. Look for the hardware or device in question.
  2. If you find it, download the drivers.
  3. Once download is complete, restart your computer to allow changes to take effect.
  4. Check for recurrence of the Windows Vista Error Code 10 problem.

Solution 2: Run Windows Update Manually

You probably already have it set up on your computer to have all Windows Updates automatically run. However, your last update may not have included what you needed to fix the Windows Vista Error Code 10 problem you are experiencing, in which  case a fresh update may just be what your system needs.

Steps:

Press F8 while your computer is booting up to start it in Safe Mode.

  1. While in Safe Mode, click the start button.
  2. Click on All Programs.
  3. Click on Windows Update.
  4. Follow the on screen prompts provided for you.
  5. Restart your computer after update is completed.

 

We hope that the information provided here will help you to rid yourself of the Windows Vista Error Code 10 problems you may be experiencing. If you still need further assistance, please do not hesitate to contact us. We are always willing to help where we can. Thank you for using our website and we wish you good luck.

See Also



Personal tools
Namespaces